SKU: SCSP10201
Scale Speed® Titanium Screw Sets

Titanium Screw Set (Associated RB10)

Regular price $59.99
Regular price $109.99 Sale price $59.99
In Stock

Same-Day Shipping*

Free Shipping*

30-Day Returns

*Shipping & Returns

Free shipping within the contiguous United States when the items in your order total $49 or more (after any discounts).

New and unused products may be returned for refund within 30 days of purchase, subject to the guidelines and restrictions here.

Orders placed Monday–Friday before the following times (Arizona) ship the same day. Orders placed after these cutoffs, on weekends, or during holidays or special events will ship the next business day.

MethodOrder By
USPS8 AM
UPS3 PM
Free Ground Shipping8 AM (PO Box)
3 PM (Standard Address)

Fitment

  • Associated RB10
  • Associated RB10 Retro
Regular price $59.99
Regular price $109.99 Sale price $59.99

Our 61-piece precision machined Grade 5 titanium screw set is 40% lighter than the factory screws, giving you an extra edge for success when sending the RB10 around the track.

Keep things looking pristine, eliminate rust-prone steel hardware, lighten things up, lower CG, and showcase this rear motor monster's peak performance.

All screws are bagged and labeled separately for easy identification using the included reference sheet.

NOTE: Titanium screws are softer than steel. Their primary benefits are corrosion resistance and being lightweight. It is recommended to first install the original steel screw into any plastic hole before installing a titanium one, and to always use snug fitting high quality drivers. Use extreme caution during installation/removal to avoid stripping the hex of the screw.

Set includes all fasteners required for the following locations:

  • C-mount to rear chassis plate
  • Front axles and gear cover
  • Top of motor guard
  • Servo to servo mount
  • Motor to mounting plate
  • Front hinge pin brace
  • Rear shock tower to chassis
  • Rear chassis brace to chassis
  • Steering rack to bellcranks
  • Caster blocks
  • Front shock tower to chassis
  • Rear shocks to arms
  • D mount to chassis
  • Rear shock tower to chassis
  • Gearbox
  • Bellcranks
  • Front shocks to arms
  • Rear shock tower to shock
  • Front shock tower to shock
  • Wing mount braces
  • Rear shock tower to body mount
  • Servo horn to servo
  • Front top plate to chassis
  • Motor plate to gearbox
  • Front bumper to bulkhead
  • Rear shock tower to wing mount

California Residents

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

  • 5 stars: 1 (33%)
  • 4 stars: 1 (33%)
  • 3 stars: 1 (33%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
C
Chuck S. (United States)

Overall, happy I purchased this kit.
I used these screws with a brand new RB10 Retro FT with Scale Speed carbon front and rear shock towers. Unfortunately my Tamiya driver set and my Dynamite driver set were not sufficient to drive the screws into the brand new plastic and were stripping the screw heads so I had to use my MIP set, which worked perfectly. One button head screw head broke off, but luckily had two extras of that size in the kit. Additionally, the front top shock mount screws are at least 2mm too long. There were two discrepancies between the screw list included in the set and what screws were actually in the bags, but it worked out in favor of building the kit overall.

Since I know we spoke via email before this review, this reply is primarily for the general public.

The usual recommendation in the hobby is to install the original steel screws when building a kit first to cut the threads into the plastic, and then replace with the titanium, so there is no excess effort and higher risk of stripping the hex head. Since the screws are Grade 5 titanium, they are softer than steel, and require extra care to not damage/strip the hex heads.

We've used Dynamite drivers and had no issue with our RB10s, but they were RTR with the threads pre-cut into the plastic. Chris's RB10 has been absolutely thrashed as well for years and has never broken a screw. We've actually broken off steel screw heads when attempting to thread them into a plastic hole that is too small, which is a similar scenario to using titanium screws and trying to form the threads using them. They simply aren't built for it, and we updated the description to explain that since your email.

These are sold for less than they cost to make, since we regret that we did not custom design the screws to have deep hexes and 'top hat' designs, and they instead were shaped to standard steel screw specifications. It is the only RB10 titanium set to ever exist, and is 1/3 the price of the equivalent JConcepts, Whitz, other brands' sets.

However, what were the discrepancies between the installation instructions vs. bags? It's been a while since we went through the list, especially since this is the first we've heard of a mismatch.

N
Niels K. (United States)

Hello, Scale speed Ti screws for the Rb10 are outstanding. I have gotten many Ti screws from other company's. This is one of the best packed, labeled and what screw to part I have used. Ho and the screws are very clean. Thanks once more for your products...

B
BlueCollarRC (United States)

The quality of the hardware is great and is well labeled and packaged. But for the price I was hoping it would be a full replacement of all the screws on the RB10

Most racers typically don't replace the lower screws, which is why nearly every set on the market is an 'upper screw set'. By making the upper screws lighter, the overall center of gravity shifts lower. For example, the B7 upper screw set (77-piece) from JConcepts is $149.99, and the option from 1up Racing is $164.99. Ours is the only one offered for the RB10 on the market, yet is still priced lower than all other (infinitely more popular) options, even relative to its 61-piece configuration.

Side note: These screw sets were the first products we ever produced, and after shipping and surprise tariffs, they turned out to have basically no margin. We just wanted to offer something to help the RB10 platform out, as we love it. Enjoy them while they're available - I am sorry you felt them to be overpriced.