This is a kit that requires assembly.
The EMB-TG is built on the same platform that LC Racing introduced in 2012, when they set the standard in high-quality race-ready small scale vehicles with the EMB-1. Optimized and refined over the years, the EMB series continues to provide the most competitive 1/14 scale 4WD options today, without breaking the budget.
- Batan D115F digital micro servo
- Adjustable servo saver
- Oil-filled aluminum adjustable coilover shocks
- 2.5 mm 6061-T6 aluminum shock towers
- Heavy duty oil filled metal gear differentials
- High traction center shaft driven 4WD drivetrain
- Metal axles throughout
- Adjustable slipper clutch
- 2 mm anodized aluminum chassis with front and rear kick-up
- Steel hinge pins
- Pre-mounted all-terrain block pin wheels/tires
- Titanium nitride coated shock shafts
- Anti-roll bar set
- 17T, 18T, and 19T pinion gears
- Polycarbonate pre-cut truggy body (clear)
Pro Kit Specific Features:
- Hobbywing waterproof brushless 2-3S 35A ESC
- 4500 Kv 2845 sensorless brushless motor
- 12 mm aluminum wheel hexes
- Shock spring set (front 1.1/1.2/1.3 mm, rear 1.0/1.1/1.2 mm)
- Carbon fiber upper deck
- Front/rear CVA driveshafts
The ESC can be programmed by using the built-in SET button, or the optional Hobbywing LED Program Card (30501003), sold separately, using the throttle cable.
Note: Refer to the new HD Differential instructions when assembling, if you are confused by the included manual's potentially outdated differential assembly process. There should be an insert including this new process, or even the newest manual that describes it, but if not, refer to the HD Differential instructions above.
| Scale | |
|---|---|
| Vehicle type | |
| Completion level | |
| Drivetrain | |
| Length | |
| Width | |
| Height | |
| Wheelbase | |
| Transmission gear ratio | |
| Transmitter | |
| Receiver | |
| Battery | |
| Maximum battery dimensions | |
| Charger | |
| Esc | |
| Connector type | |
| Servo | |
| Motor type | |
| Motor shaft diameter | |
| Pinion gear | |
| Spur gear | |
| Gear pitch | |
| Differential |
Collapsible content
What's the difference between Ready-to-Run, Kit, and Pro Kit?
What's the difference between Ready-to-Run, Kit, and Pro Kit?
The following information is specific to the 1/14 lineup:
- RTRs include everything you need to run except a charger.
-
POWERED BY HOBBYWING
-
BRUSHLESS POWER
-
METAL GEAR DIFFERENTIALS
-
TITANIUM NITRIDE SHAFTS
-
POLYCARBONATE BODY
-
ANTI-ROLL BAR SET
-
ALUMINUM WHEEL HEXES
-
CVA DRIVESHAFTS
-
CARBON UPPER DECK
-
1/10 REAR BUGGY TIRE CAPABLE
California Residents
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.